03.02.2021, 21:27
Ich bin neu mit Jura, hab mir vor einige Monate ein neue D6 gekauft und weil der Spass macht und ich die auch selbst Instandhalte mochte habe ich mir ein kapute Ena Micro 1 gekauft, zum reparieren und wenn erfolgreich fur Vati.
Jetzt habe ich die BG inkl. Drainageventil komplet Uberholt, wieder eingebaut und 1. Tasse ist alles OK. Aber, wenn dan der Kolbe nach anfangsposition ruckfahrt bleibt da ein bischen Kaffeepulver, wie am ersten Bild. Dadurch geht keine neue Kaffeepulver rein. Die Kolbe fahrt richting nach unten, wie im 2. Bild zu sehen, kann mit Schraubenzieher Punktion machen.
Drainagemotor habe ich kontroliert (wie weit dass geht), mit anschalten ohne BG geht er nach aussen un beim abschalten wieder nach innen.
Drainageventil funktioniert wie weit ich sehe auch, zB beim nachpressen nach Kaffemachen komt Wasser raus.
Enschuldigung meiner Deutsch, binn ein Hollander.
In English: I have an issues with a Ena Micro 1 I bought to repair. After reconditioning the brewgroup the machine starts working, first cup is OK, then wenn the bottom piston returns back to it's starting position instead of throwing out a nice coffee cookie there remains a thin layer of coffeepowder on top of the piston, then when the piston moves down it remains and makes it imossible for fresh coffeepowder for the second cup to enter the cilinder. As result the coffee passes the brewgroup and enters the tray bellow. I checked the drainvalve motor, which at least moves upon switching the machine on/off. The drainvalve also appears to work correct, at least to the extend I can check.
Hat Jemand noch Tipps?
Danke,
Jeroen
https://imgur.com/S8XefT
G
Jetzt habe ich die BG inkl. Drainageventil komplet Uberholt, wieder eingebaut und 1. Tasse ist alles OK. Aber, wenn dan der Kolbe nach anfangsposition ruckfahrt bleibt da ein bischen Kaffeepulver, wie am ersten Bild. Dadurch geht keine neue Kaffeepulver rein. Die Kolbe fahrt richting nach unten, wie im 2. Bild zu sehen, kann mit Schraubenzieher Punktion machen.
Drainagemotor habe ich kontroliert (wie weit dass geht), mit anschalten ohne BG geht er nach aussen un beim abschalten wieder nach innen.
Drainageventil funktioniert wie weit ich sehe auch, zB beim nachpressen nach Kaffemachen komt Wasser raus.
Enschuldigung meiner Deutsch, binn ein Hollander.
In English: I have an issues with a Ena Micro 1 I bought to repair. After reconditioning the brewgroup the machine starts working, first cup is OK, then wenn the bottom piston returns back to it's starting position instead of throwing out a nice coffee cookie there remains a thin layer of coffeepowder on top of the piston, then when the piston moves down it remains and makes it imossible for fresh coffeepowder for the second cup to enter the cilinder. As result the coffee passes the brewgroup and enters the tray bellow. I checked the drainvalve motor, which at least moves upon switching the machine on/off. The drainvalve also appears to work correct, at least to the extend I can check.
Hat Jemand noch Tipps?
Danke,
Jeroen
https://imgur.com/S8XefT
G