www.juraprofi.de & www.kaffeestudio.de - Alles für Ihren Kaffeevollautomaten
Jura S9 - System füllen, Dampf drücken - Druckversion

+- www.juraprofi.de & www.kaffeestudio.de - Alles für Ihren Kaffeevollautomaten (https://www.kaffeestudio.de/forum)
+-- Forum: Fragen und Antworten rund um Ihren Kaffeevollautomaten (https://www.kaffeestudio.de/forum/forumdisplay.php?fid=1)
+--- Forum: Technische Probleme Jura Impressa (https://www.kaffeestudio.de/forum/forumdisplay.php?fid=2)
+--- Thema: Jura S9 - System füllen, Dampf drücken (/showthread.php?tid=2557)



Jura S9 - System füllen, Dampf drücken - juraschrauber - 26.07.2014

Hallo, ich habe folgendes Problem mit meiner S9: Es kommt beim Spülen kein Wasser mehr. Es erscheint die Meldung system füllen, Dampf drücken. Nach dem drücken kommt das Wasser mit viel Druck aus dem Cappucinatore.

Was mit noch aufgefallen ist, das in dem Schlauch das aus dem Thermoblock kommt, viele Luftblasen sind. Der Thermoblock ist auch an der Oberfläche ein bischen feucht. Wie würdet  ihr weiter vorgehen? Brauch ich einen neuen Thermoblock?

Unter folgenden link habe ich ein paar Fotos:
https://www.dropbox.com/sc/adkci4ste8yrxfe/AADo6rfWPNZdXvGZR29M15FMa

Besten Dank im voraus.

Grüße

Juraschrauber

________________________________________________
english:

Hi, I have the following problem with my S9: There is no more water in the rinse. The message system fill, press steam. After pressing the water comes with a lot of pressure from the Cappucinatore.

What has struck with yet, that comes in the tube from the heating block, many air bubbles. The thermal block is a little moist at the surface. How would you proceed? Do I need a new thermoblock?

Under the following link I have a few photos:
https://www.dropbox.com/sc/adkci4ste8yrx...ZR29M15FMa

Thanks in advance.

regards

Juraschrauber


RE: Jura S9 - System füllen, Dampf drücken - BND-Kaffeestudio - 28.07.2014

Ist ein Filter in dem Gerät? Dann diesen mal rausnehmen und probieren zu entlüften.
Am besten mal probieren das Gerät zu entkalken (ohne Filter).
Vielleicht bringt das schon etwas.
ist schon seltsam das Luft drin ist, dies sollte eigentlich nicht sein. Also eine Undichtigkeit oder es geht so wenig Wasser in die Heizung, das dieses verdampft.
________________________________________
english:

Is there a filter in the unit? Then take out these times and try to vent.
The best times to try to descale the appliance (without filter).
Maybe that brings something.
is strange the air inside them, it should not be. So a leak or there is so little water in the heater that vaporizes this.


RE: Jura S9 - System füllen, Dampf drücken - juraschrauber - 29.07.2014

Ich hab jetzt den Thermoblock ausgebaut. Er war total verkalkt. Mittlerweile hab ich mittels Amidosulfonsäure und einer Spritze die Heizung wieder durchgängig gemacht. Die alten Dichtungen und die Legrisanschlüsse waren total fertig.
Neue habe ich bestellt, und dann werde ich es nochmal testen.
Gibt es eigentlich ein Bild aus einem auseinandergeschnittenen Thermoblock. Mir ist der genaue Wasserverlauf innerhalb des Block nicht ganz klar.

Zu deiner Frage noch: Einen Claris-Filter nutze ich nicht. Die Leitungen sind soweit ich festgestellt habe, kalkfrei.

Grüße

juraschrauber

__________________________________________
english:

I've now removed the thermal block. He was totally calcified. Meanwhile, I've made ??passable again by means of sulfamic acid and a syringe the heater. The old seals and the Legrisanschlüsse were totally finished.
New I ordered, and then I'll test it again.
Is there actually a picture of a cut apart thermoblock. To me the exact course of the water within the block is not entirely clear.

To your question: a Claris filter I do not use. The lines are as far as I've found, lime-free.

regards

juraschrauber


RE: Jura S9 - System füllen, Dampf drücken - BND-Kaffeestudio - 29.07.2014

Leider haben wir kein Bild vom Innenaufbau der Heizung.
__________________________________
english:

Sorry, we have no picture of the internal structure of the heating.


RE: Jura S9 - System füllen, Dampf drücken - juraschrauber - 06.08.2014

Die S9 funktioniert wieder. Smile
Nach Störung 1. (Defekter Warmwassersensor) und undichtigkeiten des Dampfboilers funktioniert wieder alles.  


Gruß

juraschrauber
_____________________________________
english:

The S9 still runs.
After Error 1 (defective warm water sensor) and a leak on the steam heater still runs everything.

Greetings

juraschrauber